Tower Version - Riello UPS SENTINEL DUAL SDL 5000 Manual De Usuario

I
NSTALLATION
WARNING: this UPS product conforms to the current electromagnetic compatibility (EMC) regulations (C2
class). It may cause radio interference in the home environment. The user may have to adopt supplementary
measures.
T
OWER VERSION
This chapter describes the operations required to prepare the UPS for use in the tower version.
WARNING: for your safety and that of your product, the information set out below should be carefully
followed.
BEFORE CARRYING OUT THE FOLLOWING SEQUENCE OF OPERATIONS,
ENSURE THAT THE UPS IS COMPLETELY SWITCHED OFF AND NOT
CONNECTED TO THE ELECTRICITY MAINS OR TO ANY LOAD
Once removed from the packaging, the UPS is ready for installation in tower configuration.
All that is needed to complete this configuration is to mount the three plastic covers provided in the upper part
of the UPS, as described below:
The three covers have an interlocking system:
locate the cover mounting holes in the upper part of
the UPS and very carefully engage them by exerting
gentle pressure (see figure at side).
50