Overcasting Stitch; Overedge Stitch - Singer 384.18024000 Manual De Instrucciones

Overcasting Stitch
Stitch selector: 5
Stitch width: 5 to 6.5
Stitch length: 1 to 2
Needle thread tension: 3to 8
Presser foot A: Zigzag foot
Presser foot C: Overedge foot
I NOTE:
Set the stitch width 5.0 to 6.5 when the overedge foot C
is used to prevent needle breakage or damaging the foot.
This is useful in garment construction and in finishing raw
edges of any sewing project.
Start overcasting about 1/8"(0.3cm) inside the raw corner of
a seam. If you start right at the edge, the fabric bunches up
and the stitches become tangled.
Overedge
Stitch
Stitch selector: 1
Stitch width: 3 to 6.5
Stitch length: 1 to 3
Top thread tension: 3 to 8
Presser foot A: Zigzag foot
WIDTH _
LENGTH _ @
® ®
or
o
ou
WIDTH _
LENGTH_
®
This stitch is often used as a seam finish to prevent fraying.
45