Beem THERMO 2 GO & GRIND Manual De Instrucciones página 21

19
In the interest of your own safety, inspect the device and the connect-
•
ing cable for damage each time before you use it. Use the device only
if it is in working order.
Do not make any modifi cations to the device. Do not replace the
•
connecting cable yourself. If the device or the connecting cable of
the device is damaged, it must be replaced by the manufacturer,
customer service department or a specialist workshop in order to
avoid any hazards.
It is essential to follow the instructions in the "Cleaning and Care"
•
chapter.
DANGER – Risk of Electric Shock
• Use the device only in closed rooms.
• Do not use the device in rooms with high humidity.
• Should the device fall into water, switch off the power supply immediately. Do not attempt to pull
it out of the water while it is still connected to the mains power!
• Never touch the device and the connecting cable with wet hands when these components are
connected to the mains power.
• Make sure that the steam which emerges is not aimed directly at electrical devices and equip-
ment containing electrical components.
WARNING – Danger of Injury
• Danger of suffocation! Keep children and animals away from the packaging material.
• Keep items of clothing such as scarves, shawls, jewellery, ties and long hair away from the
coffee bean compartment and the grinder shaft.
• Do not reach into the coffee bean compartment and the grinder shaft and do not insert any
objects when the device is in operation!
Danger of scalding from heat, hot steam or condensation!
• Avoid coming into contact with the rising steam. Do not open the water tank lid during
the brewing process.
• Be careful when removing the fi lter insert and the permanent fi lter after operating the
device. There may still be hot water remaining in the fi lter insert and in the permanent
fi lter! Always allow all parts to cool down fi rst before they are removed / cleaned.
• Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before fi lling it again.
08769_DE-EN-FR-ES-IT_A5_V3.indb 19 08769_DE-EN-FR-ES-IT_A5_V3.indb 19
EN
13.01.2020 13:57:17 13.01.2020 13:57:17