Verification Test; Display Information - Mettler Toledo ICS241 Instrucciones De Manejo

30232251A ICS241

2.7 Verification test*

The weighing instrument is verified in the following cases:
•
The accuracy class is displayed in the metrological line.
•
The securing seal has not been tampered with.
•
The warranty is not expired.
The weighing instrument is also verified in the following cases:
•
Approved scale is displayed in the metrological line.
•
Labels with the metrological data are positioned near the weight display.
•
The securing seal has not been tampered with.
•
The warranty has not yet expired.
The duration of verification of is country-specific. It is in the responsibility of the owner to
renew verification in due time.
ICS241 counting scales use a Geo code to compensate for gravitational influence. The
manufacturer of the weighing instrument uses a defined Geo code value for verification.
➜ Check if the Geo code in the instrument corresponds with the Geo code value defined
for your location.
The Geo code value is displayed when you switch on the instrument.
The Geo code for your location is shown in the Appendix.
➜ Contact your METTLER TOLEDO Service if the Geo code values do not match.
*Only for OIML

2.8 Display information

For the key, up to 20 different display items can be configured in the Info key menu.
Depending on the configuration in the Terminal –> Device –> Keyboard –>
Info key menu, the following data can be assigned in a free order, e.g.:
•
Date & time
•
Weight values
• Identifications
•
Device information
1. Press .
The (first) info screen is displayed (depending on the device).
2. Press again.
With one info screen only, the weight screen is displayed.
With several info screens, the next info screen is displayed.
3. With several info screens press
The info screen is displayed until is pressed again or
to exit the info screens.
is pressed.
13
Basic operation