Symbols On The Battery Charge; Work Area Safety; Electrical Safety For The Battery Charger; Warnings For Using The Tool - CAMPAGNOLA LN44.1000 Manual De Uso

2.4

Symbols on the Battery Charge

WARNING!
Use the battery charger indoors only
Insulation Class II
Electric equipment cannot be disposed of together with household waste.
2.5

Work area safety

•
Keep the work area clean and well lit. Cluttered or dark areas can cause accidents.
•
Do not operate electric tools in explosive and flammable atmospheres, such as in the presence of flammable
liquids, gases or powders. Electric tools can create sparks, which may ignite flammable powders or fumes.
•
Keep children and bystanders away while operating an electric tool. Distractions can cause loss of control of the
electric tool.
2.6

Electrical safety for the battery charger

•
The battery charger plug must match the outlet. Never modify the plug in anyway. Do not use any adapter if the
plug has grounding. Unmodified plugs and matching outlets will reduce risk of electrical shock.
•
Avoid any body contact with grounded surfaces, such as pipes, radiators and refrigerators. There is an
increased risk of electric shock if your body gets in contact with grounded objects.
•
Do not expose the battery charger to rain or wet conditions. Water entering it would increase the risk of electric
shock.
•
Do not make an incorrect use of the cable. Never use the cable for carrying, pulling or unplugging the battery
charger. Keep the cable away from heat, oil, sharp edges or moving parts. Damaged or entangled cables
increase the risk of electric shock.
•
When operating a battery charger outdoors, use an extension cord which is fit for outdoor use. This reduces the
risk of electric shock.
•
If operating a battery charger in a wet location is unavoidable, use a power supply residual current device
(RCD). This reduces the risk of electric shock.
2.7

Warnings for using the tool

•
Do not overload the tool. Choose the right tool to make your work safer and more efficient.
• Do not use the tool if the switch doesn't work properly. The tool must be repaired if the switch does not work
properly.
•
Disconnect the tool from the battery before carrying out any adjustment, repair, replacement or storage. This will
avoid injuries due to unexpected tool operating.
•
Store the tool away from children. Do not allow non-trained people to use it.
•
Carry out the tool maintenance operations. Always check the tool and the moving parts: Any damaged parts
can cause injuries and accidents. The correct maintenance of the tool can avoid injuries.
•
Read the manual before using the tool: choose the suitable tools and accessories to avoid any injuries.
2.8

Warnings for using battery-operated tools

•
Check that the switch is in OFF position before connecting the battery. The connection of the tool to the battery
while the switch in ON position, can damage to battery and increase the risk of injuries.
•
Just use the battery charger specified by the manufacturer. The use of other battery chargers can damage the
battery and cause risk of fire or explosion.
•
The tool is designed for being operated by the original battery only. Using other batteries can cause damages to
the tool and increase the risk of injuries.
•
The battery must be stored away from metal parts, like clips, coins, keys, nails or screws. A short circuit can
cause a fire.
•
Incorrect use will cause leakage of liquid from the battery. If your body is splashed by the liquid, please flush by
clean water and consult a doctor. Liquid of battery will cause injury and burns.
Page 24
Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 29/08/2018