Remote Slave Flash Mode Settings; Setting The Slave Channel - Metz 64 AF-1 digital Manual De Instrucciones

10.3.1 Remote slave flash mode settings

• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. PTTL flash mode).
PTTL
• Press the displayed mode of operation on
the touch display as many times as it takes
0.8- 9.0 m
for the display for selecting the mode of
M-
operation to appear.
5,6
m
35
Zoom F
m
EV
O
• Press the
MODE
touch display and select
REMOTE CONTROL
REMOTE SLAVE
• Press the
SERVO
the touch display.
Remote slave mode is set.
p
q
k
TTL Ch
REMOTE
In addition, the selected flash mode (e.g.
SLAVE
1
TTL) and the remote channel (e.g. CH 1) are
M-
displayed.
Zoom 35 m
m
P
1/1
188
sensor buttons on the
REMOTE SLAVE
.
REMOTE SLAVE
s ensor button on

10.3.2 Setting the slave channel

TTL Ch
REMOTE
• Press the sensor button on the touch
SLAVE
1
display for the channel group (e.g.
M-
TTL I Ch1
Zoom 35 m
m
The window for selecting the channel and
group appears.
P
1/1
O
SLAVE
• Press the sensor buttons on the touch
CHANNEL
display for the channel
MODE
O
CHANNEL
• Press the
CHANNEL 1
touch display and select the desired
channel.
CHANNEL 2
• Press the selected channel on the touch
CHANNEL 3
display.
p
q
TTL Ch
REMOTE
SLAVE 2
The setting will take effect immediately.
M-
"CH2" appears on the display.
Zoom 35 m
m
EV
).
CHANNEL
.
sensor buttons on the