15.2 Rotation
When the flash unit is rotated in the horizon-
tal direction, the screen display can also be
rotated.
Setting procedure
• Press the
for the selection menu to appear.
• Press the
SERVICE
touch display.
SERVICE O
• Press the
BRIGHTNESS
touch display.
ROTATION
RESET
k
ROTATION O
• Press the
OFF
display.
The setting is adopted immediately.
ON
208
D
button as often as it takes
SERVICE
sensor button on the
ROTATION
sensor button on the
ON
sensor button on the touch
16 Care and maintenance
• The screen surface should only be cleaned
with a soft, dry cleaning cloth (e.g. microfi-
bre cloth).
• If significant soiling nevertheless occurs,
the screen surface can be cleaned with a
slightly moist soft cloth.
Never spray cleaning fluid on the surface
of the screen! If cleaning fluid penetrates
into the frame of the screen, the compo-
nents there will be damaged beyond
repair.
16.1 Firmware updates
The firmware version (V.10 in the example) of
the flash unit is shown in the start screen
after switching on.
The flash unit's firmware can be updated
through the USB port
and adjusted to the
technical requirements of future cameras
(Firmware Update).
For more information, visit the Metz homepa-
ge at www.metz.de.