BIONIME GM300 Manual Del Usuario página 14

Setting Up Your Meter
4. Time Format 12H/24H Selection
With the time format blinking, press the " " or "
Then press the " " button to confirm it and move to hour setting.
5. Hour Setting
With the hour blinking, press the " " or "
press the " " button to confirm it and move to minute setting.
6. Minute setting
With the minute blinking, press the " " or "
Then press the " " button to confirm it and move to the setting mode of measurement
unit.
24
" button on the side to adjust it.
" button until the current hour appears. Then
" button until the current minute appears.
7. Ending Setting
Then press the " " button to complete the setting and go back to time screen. The settings you have
entered are saved.
8. When you do not do any settings of meter for over 3 minutes, the meter will leave setting mode and
power down automatically.
NOTE
Fast Settings :
When you do the settings, you can press the "
adjust faster.
Setting Up Your Meter
" or " " buttons and hold them for two seconds to select or
25