Recalling Your Average Test Result - BIONIME GM300 Manual Del Usuario

Recalling Your Test Result
3. If a test result is not yours or you think it is not suitable to be calculated by average, you can mark it
as non-average data by pressing and firmly holding the "
until the " " and " " appears on the screen, then press the "
4. The quality control solution test result can be recalled from the memorized data. When you see data
with the " ", it is testing data with control solution. The result will not be used for average
calculation.
5. If the ambient temperature is 0℃~9℃ or 41℃~50℃ ( 32℉~48℉ or 106℉~122℉ ), the test result
will show with " " symbol blinking. The test result under these range of temperature will not be
used for average calculation because the test result may not be correct. It is for reference only.
46
" or " " button for over 2 seconds
" button to confirm it.

Recalling Your Average Test Result

®
The Rightest meter provides you several average test results. You can view the 1-day, 7-day, 14-day and 30-day
average of test results for better blood monitoring of your blood glucose .
1. Press the main button " " to switch the screen to average function.
2. Under the average of screen, use either the " " or "
30-day average of test results.
3. The number showed on the down right corner means how many test results are calculated.
4. The " " , " " results, the control solution results, the non-average test results and the test result made out of normal
temperature range ( 0~9℃ and 41~50℃ ) are not calculated in the average.
PRECAUTION
- You have to set the time and date to activate the average function.
" for the option of 1-day, 7-day, 14-day or
47