Performing a Test in Order
View Window Appearance
Make sure your blood sample covers the whole area of the
View Window to get an accurate test result. Insufficient blood
sample might cause inaccurate test result. Repeat the test
with a new test strip.
PRECAUTION
- Check the expiration date printed on the package every time you use the strip. Do not use expired test strips.
- Use each test strip immediately after taking it out from the vial.
- Do not reuse test strips.
- Assemble the Smart Code Key into your meter is necessary before starting your test.
- Be sure to change the Smart Code Key with each new box of Rightest
- Do the test at least 30 minutes after while entering another site with different ambient temperature.
40
Insufficient blood sample
Enough blood sample
®
Test Strips.
- To ensure accurate test results, make sure the code number on your meter matches the code number
highlighted on the vial of test strips you are using.
- Only place the blood drop to the sample entry of the strip.
- Keep your Smart Code Key dry and clean. Please clean it up right away if your Smart Code Key gets blood
stain or moisture. ( Refer to page 57 for cleaning )
- Pose the finger and the strip to the way you feel most comfortable.
- Please follow the local regulation and discard the used strip and lancet properly.
Appearance of result
1. When blood is applied to the strip, you see the countdown mode appearing on your screen. This
means the meter is measuring your glucose value.
2. Your blood glucose result appears after the measurement is completed. The result is displayed in
mg/dL. At the same time, the result will be memorized with time and date.
Performing a Test in Order
41