Wheel Removal - Honda CBF1000/A Manual Del Propietário

WHEEL REMOVAL

Refer to the Safety Precautions on page 73.
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the left caliper assembly (1) from
the fork leg by removing the fixing bolts (2).
3. Remove the right
proceeding as described for the left caliper
and taking care not to damage the ABS
sensor, if present. (CBF1000A)
To avoid damage to the brake hose, support
the caliper assembly so that it doesn't hang
from the hose. Do not twist the brake hose.
100
caliper assembly
(2)
(1)
(1) Brake caliper assembly
(2) Fixing bolts