Publicidad
Idiomas disponibles
Idiomas disponibles
Indicator (ABS)(CBF1000A)
This indicator normally illuminates when the
ignition switch is set to ON and is
extinguished when the motorcycle is ridden at
a speed of more than 10 km/h (6 mph) .If
there is a problem with the ABS system, this
light flashes and remains on. When the
indicator light is illuminated the ABS system is
not operative.
If the ABS indicator illuminates while
travelling, stop the motorcycle in a safe place
and switch off the engine.
Return the ignition switch to ON. The
indicator should illuminate and then switch
off after the motorcycle has been ridden at a
speed of more than 10 km/h (6 mph). If the
indicator fails to switch off, this means the
ABS system is not working, although the
normal braking system will continue to work
and supply the normal stopping power. In
these conditions however the system should
be checked over by an authorized Honda
dealer as soon as possible.
68
The ABS indicator may illuminate if the rear
wheel is driven at high speed for more than 30
seconds when the motorcycle is upright on
the stand. This reaction is perfectly normal.
Set the ignition switch to OFF and then return
it to ON. The indicator light should illuminate
and then switch off after the motorcycle has
been ridden at a speed of more than 10 km/h
(6 mph).
Publicidad
