Publicidad
Idiomas disponibles
Idiomas disponibles
License Light Bulb
1. Remove the two screws (1).
2. Remove the license light bulb (2).
3. Remove the bulb (3) without turning it.
4. Install a new bulb in the reverse order of
removal.
(2)
(3)
(1)
(1) Screws
(2) License light bulb
(3) Bulb
124
(1)
CLEANING
Clean your motorcycle regularly to protect the
surface finishes and inspect for damage
wear, and oil or brake fluid leakage.
Avoide cleaning products that are not
specifically designed for motorcycle or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your motorcycle.
If your motorcycle is still warm from recent
operation, give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in coin-operated
car washes).
NOTICE
High pressure water (or air) can damage
certain parts of the motorcycle.
Publicidad
