Tritec TRI-KA Instrucciones De Manejo página 218

218_TRI-KA – Functions
Window 5 / 7 – TRI-SEN data
At this point, the module temperature can once again be meas-
ured with the TRI-SEN.
If no wireless connection can be established between TRI-KA and
TRI-SEN during measurement of the characteristic curve, the data
are temporarily stored in the TRI-SEN. After the measurement(s),
the data stored in the TRI-SEN must be synchronised with the
TRI-KA (chapter 10.1).
Window 6 / 7 – Save measurement
The measured data are saved on the inserted SD card. Once suc-
cessfully saved, click on the tick symbol or the right arrow to open
the next window.
Window 7 / 7 – Display of the characteristic curve
The diagram shows the characteristic curve previously measured
(green) and extrapolated to STC (red) along with the ideal char-
acteristic curve of the manufacturer (blue).
If no module was selected under the module data (window 2 / 7),
the ideal characteristic curve of the manufacturer is not shown. If
no TRI-SEN data could be stored, the measured characteristic
curve extrapolated to STC is not shown.
Click on the Home button to complete the measurement and re-
turn to the main menu.