Despite intended use, certain residual risks remain. Due to the design and construction of the
machine, hazardous situations may occur which are identified as follows in these operating
instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
14
TRANSPORT
Damaged or insufficiently strong hoists can result in serious injury or even death.
Always check hoists for adequate load-bearing capacity and perfect condition, secure
loads carefully and never stand under suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc.
The tire mounting machine must be moved in its original packaging to the place of operation. The
packed machine can be moved with a fork truck or a manual fork lift.
The machine is heavy. At least two persons are required for transport and installation.
15
ASSEMBLY
Preparatory Activities
15.1.1 Check delivery content
Check the machine immediately after delivery for transport damage and missing parts.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-RMM95
Hazard warnings
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
TRANSPORT
22