Other Settings; Energy-Saving Mode - Melita Caffeo SOLO & perfect milk Serie Manual De Instrucciones

• Turn the valve switch 11 clockwise until
the stop. is fl ashing. Water will fl ow
intermittently into the coffee grounds
container (takes about 10 minutes).
is then illuminated.
• Empty the drip tray and coffee grounds
container.
• Reinsert the drip tray and put the coffee
grounds container back under the
Cappuccinatore.
• Rinse the water reservoir thoroughly
with clear water.
• Fill the water reservoir with tap water up
to the max. mark.
• Insert the water reservoir.
• Press the button to continue with the
descaling programme.
Water fl ows into the coffee grounds
container.
When illuminates, proceed as follows:
• Turn the valve switch 11
counterclockwise until the stop. Water
fl ows inside the appliance into the drip
tray.
• When is illuminated, empty the drip
tray and the coffee grounds container
and reinsert them. When
illuminated, the descaling programme is
fi nished.
• Insert the water fi lter if necessary
(„Water hardness and fi lter", page 22).
26
BA_Solo_Perfect_Milk_042015.indd 26 BA_Solo_Perfect_Milk_042015.indd 26

Other settings

Energy-saving mode

After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes
factory.
• Switch on the appliance.
• Press the
simultaneously until
• Press the
illuminates.
• Press the
times is set. The time is displayed by the
beans on display 9.
is fl ashing.
is
• Press the
setting.
and buttons
fl ashes.
button twice.
button until one of the four
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
fl ashing
button to confi rm the
in the
Off
20.04.2015 21:17:15 20.04.2015 21:17:15