Thread Tension - Singer C430 Manual De Instrucciones

THREAD TENSION

This machine adjusts the thread tension
automatically when pattern is selected.
However you can change the thread tension as
follows.
1. Press the function F5 button directly under the
tension mark.
LCD changes to the thread tension mode.
2. To increase the upper thread tension, press the
function F5 (+) button.
To decrease the upper thread tension, press the
function F4 (–) button.
Pre-set tension number is highlighted.
The mark " " is indicating the absolute thread
tension.
By pressing the function F3 (AUTO) button, thread
tension will return to pre-set.
By pressing the function F1 button, LCD return to the
previous mode (Stitch information mode).
When another stitch pattern is selected, thread
tension will return to pre-set.
You can start sewing at this mode and change
tension while sewing.
A. Preset thread tension
Upper and bobbin thread will lock approximately
in the middle of fabric.
B. When thread tension is increased.
Bobbin thread will appear on the top side of fabric.
C. When thread tension is decreased.
Upper thread will appear on the bottom side of
fabric.
D. Thread tension (except for straight
stitch)
Thread tension should be set to a slightly looser
tension than that for straight stitch.
The upper thread should appear slightly on the
bottom side of your fabric, for example, when doing
decorative sewing.
E. Helpful Hints
1. If your sewing appears as shown in the illustration,
stitches on top side of fabric are good but bottom
side looks very loopy, this is usually an indication
that the upper thread is not threaded correctly.
Refer to page 36 for correct threading.
2. If after checking the top thread and the bobbin
thread is still showing on the top side, check
the bobbin to see if it is set correctly. Refer to
page 34 for the correct setting.
46
F5 F1 F3 F4 F5