Tabla de contenido
Publicidad
SELECTING UTILITY
STITCH PATTERN
Utility stitches are indicated in the pattern chart
located inside of the top cover.
When you turn on the machine, straight stitch will
be selected automatically.
Select utility stitch pattern as follows.
A. SELECTING UTILITY STITCH
PATTERNS
1. Press the utility button. Diagram A1.
First 5 patterns will be indicated on the LCD.
2. Press the scroll down button, next 5 patterns
will appear. Diagram A2.
By pressing the scroll up or down button,
you can scroll up or down in increments of 5
patterns. (You can also scroll down by pressing
the utility button.)
3. To select a pattern, press the function button
directly under the desired pattern. Diagram A3.
4. When pattern is selected, LCD will indicate the
information of selected pattern. Diagram A4
(Stitch information mode)
a. Stitch Number and pattern
b. Recommended presser foot
c. Setting (Mirror/reverse, Elongation)
If the mirror/reverse or elongation mark does
not appear in this area, the pattern cannot be
changed.
d. Function of function button
F2 Tack stitch (See page 42)
F3 Setting
F4 Stitch Width, Length
F5 Thread Tension (See previous page)
B. SETTING (Mirror/reverse, elongation)
1. You can change settings by pressing the
function button (F3) direcry under setting icon.
2. LCD will change to show setting mode.
i. Mirror/reverse
ii. Elongation
iii. Twin needle (See page 80)
i. Mirror/reverse stitch
You can set the mirror stitch, or reverse stitch or
mirror/reverse stitch.
Pressing the function button (F4) directly under
the mirror/reverse icon, stitch will flip from left to
right or from front to back.
The icon on the LCD indicates the selected
stitch as follows:
a. Regular stitch (normal stitch)
b. Mirror stitch (reverse left and right)
c. Reverse stitch (reverse front and back)
d. Mirror and Reverse stitch
48
F3
B-i
a
F4
a
b
c
d
F2 F3 F4 F5
iii
i ii
b
c
d
Publicidad
Tabla de contenido
