Identification Labels; Receiving And Storage - WEG CFW501 Serie Manual Del Usuario

2.4 IDENTIFICATION LABELS

There are two identification labels: one complete nameplate, located on the side of the
inverter and a simplified label under the plug-in module. The label under the plug-in
module allows the identification of the most important characteristics of the inverter
even in inverters mounted side-by-side. For further details about the position of the
labels, see figure A.2.
Serial number
Production order
Rated input data
(voltage, current
and frequency)
Stock item
Serial number
Figure 2.3: Description of the identification labels on the CFW501

2.5 RECEIVING AND STORAGE

The CFW501 is supplied packed in a cardboard box. On this package, there is an
identification label which is the same as the one attached to the side of the inverter.
Check if:
The identification of the CFW501 matches the model purchased.
„
Any damages occurred during transportation.
„
Report any damage immediately to the carrier.
Side Label of the CFW501
Front Label of the CFW501 (Under the Plug-In Module)
General Information
Model (Smart code
of the inverter)
Manufacturing date
WEG stock item
Rated input data
(voltage, current
and frequency)
Model (Smart code
of the inverter)
Manufacturing date
CFW501 | 7