Operating Modes Of The Hmi - WEG CFW501 Serie Manual Del Usuario

4.3 OPERATING MODES OF THE HMI

The monitoring mode allows the user to view up to two variables on the main display
and secondary display. Such fields of the display are defined in
The setting mode is composed of three levels: Level 1 allows the user to select the Menu
items to direct the browsing of the parameters. Level 2 allows browsing the parameters
of the group selected by level 1. Level 3, in turn, allows the modification of the parameter
selected in Level 2. At the end of this level, the modified value is saved or not if the key
ENTER or ESC is pressed, respectively.
Figure 4.3 illustrates the basic browsing of the operating modes of the HMI.
It is the initial status of the HMI after the powering
„
up and of the initialization screen, with default
values.
The field Menu is not active in this mode.
„
The main display and secondary display indicate
„
the values of two parameters predefined by
P0205 and P0206.
From the monitoring mode, when you press
„
the key ENTER/MENU, you commute to the
setting mode.
Level 1:
This is the first level of the setting mode. It is
„
possible to choose the parameter group using
the keys  and .
The main display, secondary display and
„
measurement units are not shown in this level.
Press the key ENTER/MENU to go to level 2 of
„
the setting mode – parameter selection.
Press the key BACK/ESC to return to the
„
monitoring mode.
Level 2:
The number of the parameter is shown on the
„
main display and its content on the secondary
display.
Use the keys  and  to find the desired
„
parameter.
Press the key ENTER/MENU to go to level
„
3 of the setting mode – modification of the
parameter content.
Press the key BACK/ESC to return to level 1
„
of the setting mode.
Level 3:
The content of the parameter is shown on the
„
main display and the number of the parameter
is shown on the secondary display.
Use the keys  and  to configure the new
„
value for the selected parameter.
Press the key ENTER/MENU to confirm the
„
modification (save the new value) or BACK/ESC
to cancel the modification (not save the new
value). In both cases, the HMI returns to level 2 of
the setting mode.
Monitoring Mode
Setting Mode
Figure 4.3: Operating modes of the HMI
HMI (Keypad) and Basic Programming
figure
BACK
ESC
BACK
ESC
BACK
ESC
4.2.
Monitoring
ENTER
MENU
Setting
Level 1
ENTER
MENU
Setting
Level 2
ENTER
MENU
Setting
Level 3
CFW501 | 25