Startup; Startup Menu; V/F Control Type (P0202 = 0) - WEG CFW501 Serie Manual Del Usuario

Powering up and Startup

5.2 STARTUP

The startup is explained in a very simple way, using the programming features with the
existing parameter groups in the menus STARTUP and BASIC.

5.2.1 STARTUP Menu

5.2.1.1 V/f Control Type (P0202 = 0)

Seq Indication on the Display / Action
1
Monitoring mode.
„
Press the key ENTER/MENU to enter 1
„
level of programming mode.
2
The PARAM group is selected, press the
„
keys  or  until selecting the STARTUP
group.
3
When the STARTUP group is selected
„
Press the key ENTER/MENU.
4
If necessary, press ENTER/MENU to
„
modify the content of "P0202 – Control
Type" for P0202 = 0 (V/f).
5
When the desired value is reached, press
„
ENTER/MENU to save the modification.
Press the key  for the next parameter.
„
Figure 5.2: Sequence of the Startup group for V/f control
28 | CFW501
Seq Indication on the Display / Action
6
If necessary, modify the content of "P0398 –
„
Motor Service Factor".
st
Press the key  for the next parameter.
„
7
If necessary, modify the content of "P0400 –
„
Motor Rated Voltage" or press the key  for
the next parameter.
8
If necessary, modify the content of "P0401 –
„
Motor Rated Current" or press the key  for
the next parameter.
9
If necessary, modify the content of "P0402 –
„
Motor Rated Frequency", or press the key 
for the next parameter.
10
If necessary, modify the content of "P0403 –
„
Motor Rated Frequency", or press the Key 
for the next parameter.