WEG CFW501 Serie Manual Del Usuario página 34

Seq Indication on the Display / Action
11
If necessary, modify the content of "P0404
„
– Motor Rated Power", or press the key 
for the next parameter.
12
If necessary, modify the content of "P0407
„
– Motor Rated Power Factor", or press the
key  for the next parameter.
Figure 5.2 (cont.): Sequence of the Startup group for V/f control
Powering up and Startup
Seq Indication on the Display / Action
13
To exit the STARTUP menu, just press BACK/
„
ESC.
14
Through the keys  and , select the desired
„
menu or press the key BACK/ESC again
to return directly to the monitoring mode of
the HMI.
CFW501 | 29