Stop For Cut; Audible Beep; Contrast Of Screen; Calibration Screen - Singer EM200 Manual De Instrucciones

E
MBROIDERY
S
TOP FOR CUT
When starting to embroider, the machine can be set so that it
will stop after a few stitches, allowing you the opportunity to cut
the thread tail.
You can select or deselect this function, as follows:
i. Stop for Cut is activated.
ii. Stop for Cut is deactivated.
i
ii
A B
UDIBLE EEP
You can turn the audible beep on or off by pressing this button.
i. Audible Beep is on.
ii. Audible Beep is off.
i
ii
CONTRAST S
OF CREEN
You can adjust the contrast of the LCD screen.
By pressing "+" or "–" button, contrast will increase or
decrease.
P
REPARATION
C S
ALIBRATION CREEN
If the icons on the screen (in relationship to where you touch
the screen) seem misaligned, the screen may need calibrating,
as follows:
1. Scroll down and press calibration screen button.
2. Press the each "O" mark indicated on the screen 5
positions. (4 corners and center)
When calibration is completed, setting screen will appear
again.
1
2
5
S V
OFTWARE ERSION
Software version of this embroidery machine will be indicated
at the bottom of this screen.
You can update the software by using the USB embroidery
stick.
(See page 11)
17
3
4
6
(example)