Using The Refrigerator - Mobicool F15 Instrucciones De Uso

Operation
6.2

Using the refrigerator

A
NOTICE! Risk of damage
 Ensure that the objects or goods placed in the cooling device
are suitable for cooling or warming to the selected tempera-
ture.
 Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
 Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤ Plug the 12 Vg-connection cable (fig. 1 2, page 3) into the DC socket
and also into the cigarette lighter or a 12 V socket.
or
➤ Plug the 220–240 V connection cable (fig. 1 3, page 3) into the AC volt-
age socket and connect it to the 220–240 V AC mains supply.
➤ Push the switch (fig. 2 3, page 3) on the control panel to "HOT" or
"COLD" to switch the device on.
✓ The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
➤ If you wish to switch the refrigerator off: slide the switch (fig. 2 3, page 3)
to the "OFF" position and disconnect it from the mains.
I
NOTE
If you are not going to use the refrigerator for a long time, leave
the door slightly ajar to prevent unpleasant odours building up.
10
F15
EN