Progressive Metering Devices Model Ssv; Suitable Lubricants; Progressive Metering Devices - General - Lincoln Quicklub SSV Instrucciones De Funcionamiento

Owner Manual
Operating Instructions

Suitable Lubricants

• The progressive metering devices model SSV can be used for
dispensing
- mineral oils of at least 40 mm²/s (cST) or
- greases up to the penetration class NLGI 2

Progressive Metering Devices - General

Fig. 1 -SSV 8 metering device, shown as a demonstration model
Page 4/19
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259

Progressive Metering Devices Model SSV

Note: It must nevertheless be ensured that the oils or greases
used do not alter their consistency in the course of time or
under the influence of temperature or pressure.
The progressive metering devices
- are piston-operated metering devices;
- automatically (progressively) dispense the lubricant fed by the
pump to the connected lubrication points;
- have a lubricant output of 0,2 cm
- when one or more outlets are closed (see "Combining of outlets)
they can dispense a double or multiple lubricant quantity;
- are available with 6 to 12 outlets or up to 22 outlets;
- offer the option of combining several lubrication points into one
centralized lubrication point.
-
reliably meter the feed lubricant in preset single quantities;
-
can be monitored usually or electrically;
• A blockage in any lubrication circuit is indicated by grease leaking
at the corresponding pressure limiting valve
10002709
2.2A-20001-F06
3
per outlet and piston stroke;