Intended Use; Approvals - Dräger FPS 7000 Instrucciones De Uso

Description
Dräger FPS 7000 facepieces are available in various versions:
as full face mask (consisting of mask body with rubber flaps and
head harness). A rubber harness or a hair net can be used as head
harness.)
as mask/helmet combination (consisting of mask body without
rubber flaps, with mask/helmet adapter S-fix or Q-fix and helmet).
The facepieces are available in the following versions:
round thread connection RD40x1/7" acc. to EN 148-1 for res-
RA piratory filters, self-contained breathing apparatus or line
breathing apparatus
threaded connection M45x3 acc. to EN 148-3 for self-con-
PE
tained breathing apparatus or line breathing apparatus
standard thread connection acc. to DIN 58600 for self-con-
ESA tained breathing apparatus and line breathing apparatus as
well as for respiratory filter acc. to EN 14387
NOTE for ESA connections
i
i
The exhalation resistances stipulated by EN 136 will not be
met when self-contained breathing apparatus or respiratory
filters with round thread connection according to DIN EN 148-
1 are used.
Plug connection (Dräger-specific) for self-contained breath-
P
ing apparatus or line breathing apparatus.
The facepieces can be used within a temperature range between
-30 °C and +60 °C.
Special goggles are available for users who wear spectacles.
20
2.2

Intended use

The facepieces of the Dräger FPS 7000 series protect the face and the
eyes against aggressive media. They may only be used with approved
self-contained breathing apparatus, fresh air hose breathing appara-
tus or respiratory filters.
2.3

Approvals

The full face masks are approved to EN 136:1998 + CL.3. The mask/
helmet combinations are also approved to DIN 58610. Both versions
are marked with the CE mark of conformity. In addition, they meet the
flame engulfment requirements stipulated in EN 137.
The facepieces Dräger FPS 7000 RA
Zealand to AS/NZS 1716:2012.
The facepieces are approved with the following self-contained breath-
ing apparatus series:
PAS Standard
PAS Lite
PSS 90
PSS 100
PSS 3000
PSS 5000
PSS 7000
The following mask/helmet combinations are approved:
Dräger FPS 7000 S/HPS
Dräger FPS 7000 S/F1
Dräger FPS 7000 S/Supra
Dräger FPS 7000 Q/HPS
NOTICE
i i
Full face masks must not be retrofitted to a mask/helmet com-
bination. Strictly follow the corresponding Instructions for Use
of the helmet.
(Certified by Dekra Exam)
are approved in Australia and New
Dräger FPS 7000