Side Control - Christie LHD700 Guía De Referencia Rápida

Side Control and Indicators

Side Control

①
②
③
④
⑤
① ON/STAND-BY button
Turn the projector on or off.
② INPUT button
Select an input source.
③ MENU button
Open or close the On-Screen Menu.
④ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu.
– Pan the image in Digital zoom + mode.
⑤ SHUTTER button
Close and open up the built-in shutter.
⑥ SELECT button
– Execute the selected item.
– Expand or compress the image in the Digital
zoom mode.
⑦ LENS button
Enter the focus, zoom, and lens shift adjustment
mode.
Indicators (on the top panel)
⑦
⑥
⑧ POWER indicator
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode.
⑨ LAMP/ SHUTTER indicator
Light red during operations.
Light blue when the shutter is closed.
⑩ LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life.
⑪ WARNING FILTER indicator
– Blink slow when the filter is being scrolled.
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed.
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate filter/
filter cartridge replacement.
⑫ WARNING TEMP. indicator
Blink red when the internal temperature of the
projector exceeds the operating range.
10
⑧
⑨
⑩
⑪
⑫
020-000424-01 Rev.1 (11-2011)