Gas Dryer - Haier GDE480BW Manual Para El Usuario

GAS DRYER

Electrical Supply Requirements
The gas dryer must be plugged into a properly grounded 3-wire, single
phase, 120 volt, 60Hz, AC-only electrical outlet, fused with a 15-amp
time-delay fuse or circuit breaker.
•
The dryer is equipped with a power cord that has a 3 prong plug. Do not cut or
remove the grounding prong from the power cord.
•
The power cord must be plugged into a mating, 3 prong outlet, grounded in
accordance with local codes and ordinances. If a mating outlet is not available,
contacted a licensed electrician to have one installed.
•
If you are not sure that your outlet is properly grounded, contact a licensed
electrician.
•
Do not use a 3 prong plug adapter.
•
Do not use an extension cord.
Gas Supply Requirements
NOTE: The gas service to the dryer must conform with local codes and ordinances
and the latest edition of the National Fuel Gas Code, ANSI Z223.1 or in Canada,
CAN/CGA B149.1.
Natural Gas
•
The dryer is equipped for use with Natural gas.
LP (Liquid Propane) Gas
•
The dryer can be converted for use with LP gas.
•
Conversion to LP gas must be made by a qualifi ed technician.
10
WARNING