MOBILE HOME - ADDITIONAL REQUIREMENTS
•
The installation must conform to current Manufactured Home Construction and
Safety Standard, Title 24 CFR-Part 3280 or the Canadian Manufactured Home
Standard CAN/CSA-Z240 MH.
•
Special provisions must be made for outside makeup air. The opening should be
at least twice as large as the dryer exhaust outlet.
•
If the dryer is exhausted through the fl oor and into an enclosed area beneath the
mobile home, the exhaust system must terminate outside the enclosure with
the termination securely fastened to the mobile home structure.
GAS DRYER ONLY (MOBILE HOME ONLY)
•
The dryer must be fastened to the fl oor using a mobile home installation kit.
Follow the instructions supplied with the kit.
14