Haier GDE480BW Manual Para El Usuario página 24

START/PAUSE BUTTON
•
Press this button to start a selected cycle or to pause an operating cycle.
NOTES:
•
After starting the dryer, you must pause an operating cycle to change the
Temp setting.
•
Opening the dryer door will also pause an operating cycle.
•
If the cycle status is Wrinkle Saver, pressing the pause button or opening
the dryer door will cancel the operating cycle and turn the power o .
DRY LEVEL BUTTON
•
Use to select a level of dryness for Auto Cycles only. There are 3 levels to
choose from: More, Normal, and Less.
CYCLE STATUS INDICATORS
•
When a cycle is selected, but the START/PAUSE button is not pressed, the
Cycle Status Indicator (LED lights) of all the stages will turn on. This means
that the machine is ready and on stand by.
•
After the START/PAUSE button is pressed and the dryer is operating, the
indicator for the current stage of the dry cycle blinks. As each stage of the
dry cycle is completed, the indicator light turns o and the light for the next
stage begins to blink.
•
The dry cycle is complete when the Cool Down light turns o . Remove
the clothes when the desired dryness level is reached. Wrinkle Saver is to
prevent wrinkles from setting on clothes by tumbling periodically during the
fi rst hour after the dry cycle is complete.
FEATURES
END OF CYCLE SIGNAL
•
A signal will sound at the end of the cool down cycle to alert you that the load is
complete.
WRINKLE SAVER
•
At the end of the cool down cycle, the dryer will periodically tumble for 1 hour to
prevent wrinkles from setting in your garments.
22