Playing A Game; Starting A Game - Sony PlayStation 2 Manual De Instrucciones

16

Playing a game

Starting a game

1
Turn on the console using the
main power switch on the
console rear.
The 1 (standby) indicator on the
console front lights up in red to
indicate that the console is now in
standby mode.
2
Press the 1 (standby)/reset
button.
The 1 indicator turns green and the
start-up screen is displayed.
3
Plug the analog controller
(DUALSHOCK 2) into a controller
®
port of the console.
3
4
Press the A (open) button.
The disc tray opens.
5
Place a disc on the disc tray with
the label side facing up (data
side down).
6
Press the A button.
The disc tray closes. Screen 2 or 3 is
displayed and the game is ready to
begin.
Note
Set the analog controller (DUALSHOCK
appropriate mode for the software (see "Mode switching
and the mode indicator" on page 17). Refer to the
appropriate software manual for details.
1
Restarting a game
Press the 1/reset button. (Be sure not to hold
the button down for any length of time, as that
will put the console in standby mode.)
Do not accidentally press the 1/reset button
while playing a game, or the game will restart.
Screens that appear at start-up
When turning on the console without first
inserting a disc
Screen 1 is displayed.
• When you insert a PlayStation
PlayStation format disc after screen 1 has
®
appeared, screen 2 or 3 will be displayed
and you can start the game.
• You can move to the Browser screen or the
System Configuration menu from screen 1.
(For details, see "Using the main menu" on
page 14.)
When turning on the console with a disc
already inserted
Depending on the type of disc inserted, screen
2, 3 or 4 will be displayed.
2) to the
®
If screen 4 is displayed, it is possible that the
inserted disc is not a PlayStation
PlayStation 2 format disc. Check the disc type
®
(page 4).
1 No disc is inserted (main menu).
2 PlayStation 2 format DVD-ROM /
2
®
CD-ROM is inserted.
4,6
5
3 PlayStation format CD-ROM is inserted.
®
4 A disc that cannot be played with the
PlayStation 2 console is inserted.
®
2 or
®
Ending a game
1
Press the A (open) button.
The disc tray opens.
2
Remove the disc.
or
®
3
Press the A button.
The disc tray closes.
4
Press the 1/reset button for
more than three seconds.
The 1 indicator turns red and the
console enters standby mode.
Notes
• To quit an online software title, follow the on-screen
instructions or the instructions in the software manual.
• If you cannot find instructions, you can quit by
pressing the 1/reset button. The 1 indicator will turn
red when the console has entered standby mode.
• If you are not able to quit using the method above, you
can force the software to quit by pressing and holding
down the 1/reset button until the 1 indicator turns
red.
• When playing an online software title you cannot use
the 1 (standby)/reset button on the console front to
restart the title.
4
1,3
2