KPS -PA40 Manual De Funcionamiento página 18

ductor.
Símbolo de dirección de la corriente CC.
2
3 HOLD button. When this button is pushed, the display will keep the last
reading and " H " symbol will appear on the LCD. Pushing again returns the
meter to normal mode.
4 Rotary switch. This Rotary switch is used to select functions and power
supply of the meter on or off.
5 Δ ZERO button. Push the button to get relative measurement mode "Δ
ZERO". annunciate display on LCD. But store the displayed reading as a refer-
ence value. In the Relative mode, the value shown on the LCD is always the
difference between the stored reference value and the present reading. If the
new reading is the same as the reference value, the display will be zero.
6 LCD Display
KPS-PA40 • Digital clamp meter
Auto range indication
Diode test indication
Continuity indication
Data hold indication
Relative measurement indication
Low battery indication
DC input indication
AC input indication
18