KPS -PA40 Manual De Funcionamiento página 19

KPS-PA40 • Digital clamp meter
7 "VΩ Hz" Jack. This is positive input terminal for volt, diode, resistance,
capacitance frequency,duty cycle and Continuity measurement connection is
made to it using the red test lead
8 "COM" Jack. This is negative (ground) input terminal for all measurements
except current. Connection is made to it using the black test lead or the black
plug with "k" type thermocouple.
9 "°C" Jack.This is positive input terminal for temperature measurement con-
nection it using the red plug with "k" type thermocouple.
10 SELECT button. In
function. Different symbol of function and measurement unit will appear on ¡
the LCD.In current range, press this button to select AC current or DC current.
11 Botón Hz% button. Push the button is used to select frequency or duty
cycle measurement in Hz range.
12 Rigger. Press the lever to open the transformer. When the lever is
released,the jaws will close again.
Polarity indication
Duty cycle measurement indication
Temperature (centigrade) measurement
Temperature (fahrenheit) measurement
Voltage measurement unit
Ohm measurement unit
Frequency measurement unit
Capacitance measurement unit
Current measurement unit
range, push the button to select Ω,
19
, or