Locking The Position Locking Device - Invacare Aquatec Ocean VIP Manual Del Usuario

®
Aquatec Ocean VIP / VIP XL / Dual VIP
Removing/fitting the seat plate
Removing:
1. Pull the seat plate upwards on both sides.
Fitting:
CAUTION!
Risk of getting fingers caught
– Do not insert fingers between the seat surface and the
seat frame when pressing down on the seat plate.
1. Place the seat plate on the seat frame with the cutout to the
front.
2. Push the seat plate backwards as far as it will go.
3. With your hand flat, press the seat plate down at the sides and
then at the front and back until the seat plate snaps into the
seat frame.

Locking the position locking device

The position locking device only locks in position if the
wheel is in forward position.
1. Lock the locking device at the caster with the blue foot pedal.
The caster is fixed in forward position.
18 1563142-A