Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Please read the following
wARNING
instructions carefully before
installing the product.
1. only suitable if the approved vehicle has been fitted
with three-point safety belts that meet ECE standard
nº 16 or equivalent.
2. Under no circumstances should the safety seat be
installed in the front seat of the car opposite the
direction of travel if the car is equipped with an
active airbag.
3. This car seat is designed to offer the optimal safety in
all installation modes described in this manual.
4. This child seat must be used wITH the harness
system for children weighing between 0 kg and
18 kg.
5. Ensure that the part of any abdominal belt or strap
should rest as low as possible over the child's hips, on
both sides.
6. Please read the instructions carefully, as incorrect
installation could result in serious injury. If any injuries
should occur as a result of incorrect installation, the
manufacturer will accept no liability.
7. This child restraint system complies with the rules of
Regulation ECE 44/04 and can be installed in most
vehicles equipped with 3-point seat belts aligned to
ECE Regulation 16. Under no circumstances shall this
seat be fitted only with a 2-point lap belt.
34
8. Please never use the safety seat without its cover or
without the harness protectors.
9. Fastening a child dressed in outerwear could reduce
the efficiency of the restraint system.
10. make sure to protect the child safety seat from direct
sunlight as it could heat up and hurt the child.
11. Child seats or harness accessories that are
damaged or have been used incorrectly must be
replaced.
12. Do not leave heavy objects inside the car, as these
may injure the child in the event of an accident.
13. make sure that the buckle is correctly fastened
so that the child can be quickly freed in case of
emergency.
14.The safety seat's rigid and plastic elements should
be positioned and installed so that they cannot be
trapped by a moving seat or a door during everyday
use of the vehicle.
15. Do not disassv emble, modify, or add any piece to
the child seat or harness, as this would seriously
affect its basic functioning and the safety that the
child seat provides.
16. The safety seat must remain installed in the vehicle
with the safety belt, even if the child is not seated
in the child seat. The child must never be left
unattended while seated in the safety seat, not even
outside the vehicle.
BNO FIX 0+123
17. Keep the safety seat away from corrosive products.
18. Do not use anchor points that are not listed in the
instruction manual and indicated on the seat.
19. The seat should be replaced after undergoing the
violent stresses associated with an accident.
20. The manufacturer guarantees the quality of its
products, but not the quality of second-hand
products or products belonging to other companies.
21. Instruction
illustrations
are
for
informational
purposes only. The child restraint system may
contain small differences compared to the
photographs or images in the instruction manual.
These variations do not affect its certification under
ECE Regulation R44/04.
22. Ensure that any strap or belt that holds the child is
not bent or twisted and keeps tightened. Act under
the same criteria with the vehicle belts that serve as
a restraint for the chair.
www.babyqs.com
1. OVERVIEW
(1)
Headrest
(9)
Headrest
(2)
Belt guide
height adjuster
(group 2/3)
(10)
Shoulder
(3)
Shoulder
straps
protectors
(11)
Abdominal belt
(4)
Cushion
guide (groups
0+/1/2/3)
(5)
Buckle latch
(12)
Base
(6)
Harness buckle
(13)
Harness
button
adjustment
button
(7)
Harness buckle
(14)
Harness
adjustment belt
(8)
Crotch pad
(15)
Reclining lever
(9)
Headrest
height
adjuster
(18)
Shoulder pads
strap connector
(16)
Diagonal
belt guide
(group 0+/1)
(11)
Abdominal belt
guide (groups
(17)
Harness
0+/1/2/3)
strap
connector
(21)
Isoclick Fix
system unlock
(19)
Isoclick Fix
button
arms
®
35
Publicidad
Tabla de contenido
