2. USES IN THE VEHICLE
WHERE:
In the vehicle rear seats.
Please, do noT install the safety seat in
forward seats except for the following cases:
1. Whenever the vehicle does not count with
rear seats.
2. When all rear seats are already occupied by
children exceeding 135 cm height.
3. When it is not possible to install all child
restraints systems in the rear seats.
HOW:
GROUP 0+ /1 • Install rearward facing.
GROUP 1 • Install forward facing.
GROUP 2/3 • Install forward facing.
(vehicle's 3 point belt).
Notice
The child seat must only be used in this seat IF
it has a lap and diagonal belt (3 points).
36
3 point belt.
—
2 point belt.
A
A
Diagonal belt
B
section.
1
Abdominal belt
B
section.
1
2
wARNING
Refer to the vehicle's instruction manual
to install the seat in the front seat.
2
The seat offers a number of assembly options. The
following table shows the installation types for each
group:
OPTION 1 / wITH THE VEHICLE'S BELT
GROUP
SEAT POSITION
0+
• Rearward facing
0-13 kg
1
• Rearward facing
9-18 kg
• Forward facing
2/3
• Forward facing
15-36 kg
OPTION 2 / wITH THE VEHICLE'S BELT+ISOCLICK FIX
ORIENTACIÓN
GRUPO
DE LA SILLA
0+
• Rearward facing
0-13 kg
1
• Rearward facing
9-18 kg
• Forward facing
2/3
• Forward facing
15-36 kg
BNO FIX 0+123
www.babyqs.com
1
fig. 1
SEAT
CHILD
3
INSTALLATION
INSTALLATION
3 point
5-point belt
vehicle's belt
3 point
5-point belt
vehicle's belt
3 point
Vehicle's
3. GENERAL SEAT USE
vehicle's belt
belt
3.1. How to use the harness buckle
1. Bring the two clasps together (fig.1.1).
®
2. make sure the correct side is facing up (fig.1.2).
SEAT
CHILD
INSTALLATION
INSTALLATION
3. Fasten the two clasps together before inserting them
into the harness buckle. You should hear a click
Isoclick Fix
®
(fig.1.3).
+ vehicle's
5-point belt
belt
4. Pull the harness adjustment belt
of the strap that covers the lap is not loose, ensuring
Isoclick Fix
®
the harness is taut and the buckle closed. open the
+ vehicle's
5-point belt
belt
harness buckle
(7)
3.2. Harness buckle care
Isoclick Fix
®
Vehicle's
+ vehicle's
belt
In order to ensure child safety it is essential that the
belt
harness works correctly. If this is not the case it is
probably because of an accumulation of dirt or foreign
bodies.
2
4
Press
(14)
so that the part
by pressing the red button (fig.1.4).
37