Electronic Equipment; Electronic Circuit Board; Serial Port; Backup Battery - EdilKamin LOGO Instalación Uso Y Mantenimiento

LEO R O is a combustion safet and control s stem which allows optimal performance in all
®
conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke
temperature.
he detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
he LEO R O s stem offers constant combustion, automaticall regulating the draft based on the
®
characteristics of the chimne
(wind, humidit , atmospheric pressure, installations at high altitude, etc.).
he standards for installation must be respected.
LEO R O ® s stem is also able to recognise the t pe of pellets and automaticall d ust the ow mo-
ment b moment to ensure the required level of combustion.

ELECTRONIC CIRCUIT BOARD

SERIAL PORT

he ealer can install an optional on the
switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the
stove. an be connected via special optional trestle (code

BACKUP BATTERY

backup batter is found on the control board ( - olt R
function is indicated with the following messages (not considered a defect but due to
normal wear-and-tear) " atter check".
For more detailed information, please contact the E LER who has performed the rst
st ignition.

ELECTRONIC EQUIPMENT

ue (bends, length, shape, diameter, etc..) and environmental conditions
consolle
smoke rpm
socket
RS
Smoke e pulsion motor
ventilation
outlet for controlling the process of
sensor air
ow
ambient
sensor
screw rpm
acuum gauge
thermocouple
Reading
points
backup batter
lithium R
fuse
fuse
OR
S REW
).
batter ). ts mal-
- 23
-
acuum gauge
vac power suppl
- %
K S O E
FUSE *
two fuses are inserted in the socket with
switch, located on the back of the stove,
one of which operational and the other is
held in reserve.
* *