Operating Conditions; Power Requirements; Opearing Temperature And Humidity - AD Instruments AD2817C Manual De Usuario

AD2817C Operation Manual
correction can be performed at the frequency points you specify.
AD2817C provides 3 display modes and 2 kinds of sorting modes:
Direct:
The actual measurement results are displayed.
z
Absolute deviation ( ABS):
DUT and a previously stored reference value are displayed.
Percentage deviation ( %):
DUT and a previously stored reference value are displayed as a percentage of the
reference value.
Component sorting:
z
deviation can be used.
4-bin sorting:
3 PASS bins, 1 FAIL bin, and 1 AUXiliary BIN.
AD2817C provides several communication interfaces which make it easy to output the
measurement results to other equipments (for example computers), or build an automatic
test system.
RS232C interface:
z
quipments. You can set the measurement functions and input the parameters through
RS232C interface instead of keyboard on front panel.
IEEE488 interface (optional):
z
automatic test system with computer and other measurement instruments.
Command of RS232C and IEEE488 interfaces are programmed in the format of
common SCPI.
HANDLER interface:
z
combined with a component handler, and a system controller to fully automate
component testing, sorting, and quality control data processing.
AD2817C has the file function to store the set parameters, limit parameters and list sweep
parameters as a file in the internal nonvolatile memory, so that the setups can be easily
reloaded, and the defult file will be automatically reloaded when AD2817C is turned on.

1.8 Operating Conditions

1.2.1 Power requirements

Vltage: 220V (1±10%)
Frequency: 50Hz/60Hz (1±5%)
Power: <50VA

1.2.2 Opearing temperature and humidity

Temperature: 0qC 40qC
The difference between the measured value of the
The difference between the measured value of the
Two comparison modes, absolute deviation and percent
RS232C interface makes it easy to communicate with other
IEEE488 interface helps instrument to build an
By using the handler interface, the instrument can easily be
2