Bias; Measurement Setup - AD Instruments AD2817C Manual De Usuario

AD2817C Operation Manual
3. Press SHIFT key, and "SHIFT" at left corner is on.
4. Press COMP key, "COMP" is displayed on LCD, which means comparison function has
been turned on, as shown in Figure 4-7.

4.2.12 Bias

Press SHIFT + BIAS to turn on or off bias.
Before using bias function, bias mode should be selected:
Bias voltage mode: used for bias voltage measurement of capacitor and transistor.
z
Bias current mode: used for bias current measurement of inductor, transformer, and
z
relay.
After bias mode is turned on, the message "BIAS" will be displayed on the LCD screen.
Perform the following steps to turn on or turn off bias function:
1. Press SHIFT key, and "SHIFT" at left corner is on.
2. Press BIAS key, "BIAS" will be displayed on LCD screen, which means that bias function
is turned on, as shown in Figure 4-8.

4.2.13 Measurement setup

Perform the following steps to enter measurement setup page:
1. Press SHIFT key at test page, and "SHIFT" at left corner is on.
2. Press SETUP key to enter measurement setup page, as shown in Figure 4-9.
Measurement setup includes the following items
TRIG:
DELAY:
Figure 4-7 Comparison function on/off
Figure 4-8 Bias function on/off
Figure 4-9 Measurement setup page
trigger mode;
measurement delay;
25