Display Description - AD Instruments AD2817C Manual De Usuario

AD2817C Operation Manual
8) Bias voltage adjustment electrograph
The instrument is internally equipped with -5V
electrograph. After bias current mode is selected, -50mA +50mA bias current can be got
by adjusting bias voltage.
9) LINE input receptacle
AC power cord receptacle.
5) Fuse holder
Fuse holder for AD2817C line fuse, 220Vac, 1A.
6) Name plate
Name plate is used to provide the information of date, model, lot number and
manufacturer etc.
7) Grounding
If the power cord doesn't ground or isn't reliably grounding, please connect grounding line!

3.6 Display Description

1) Alarm display
"on: to turn on alarm
"
" off: to turn off alarm
"
2) Primary parameter indicator
It indicates primary parameters of the currently measured component.
AD2817C has the following primary parameters: L
3) Measurement result display
It displayes measurement results of the device under test.
Figure 3-4 Display area
, L
S
17
+5V bias voltage adjustement
, C , C , R , R , Z, L2A, L2B.
P S P S P