Warm-Up Time; Notices; Dimensions & Weight; Safety Summary - AD Instruments AD2817C Manual De Usuario

AD2817C Operation Manual
Humidity: <90%RH

1.2.3 Warm-up time

More than 20 minutes after the instrument is turned on.

1.2.4 Notices

Please do not operate the instrument in the place that is vibrative, dusty, under direct
z
sunlight, or where there is corrosive air.
Although the instrument has been specially designed for reducing the noise cased by
z
ac power, a place with low noise is still recommended. If this cannot be arranged,
please make sure to use power filter for the instrument.
Please store the instrument in the place where temperature is between 5
z
humidity is less then 85% RH. If the instrument will not be put in use for a time,
please have it properly packed with its original box or a similar box for storing.
Don't frequently turn on and off the instrument, doing so will lead to the loss of the
z
calibrated data and the data saved by users.
1.9 Dimensions & Weight
Dimensions: 270 120 380 (mm
Weight: approx. 3kg

1.10 Safety Summary

The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument.
Ground the instrument
z
To avoid electric shock hazard, the instrument chassis and cabinet must be connected to a
safety earth ground by the supplied power cable with earth blade.
DO NOT operate in an explosive atmosphere
z
Do not operate the instrument in the presence of flammable gasses or fumes. Operation of
any electrical instrument in such an environment constitutes a definite safety hazard.
Keep the instrument away from live circuits
z
Operator can not remove instrument's cover. Component replacement and internal
adjustments must be made by qualified maintenance personnel. Do not replace
components with the power cable connected. Under certain conditions, dangerous
voltages may exist even with the power cable removed. To avoid injuries, always
3
)
3
and 40 ,