AD Instruments AD2817C Manual De Usuario página 94

AD2817C Operation Manual
13) RANGE
Perform the following steps to set different range types:
a)
Select "RANGE" through
d) Press ▲ or ▼ key to select "LCR" or "DCR".
e) Press ENTER key or
14) ALCZ
Perform the following steps to turn on or off auto LCZ:
d) Select "ALCZ" through
e) Press ▲ or ▼ key to select "ON" or "OFF".
f) Press ENTER key or
10) CABLE
Perform the following steps to set cable length:
a)
Select "CABLE" through
b) Press ▲ or ▼ key to select "om", "1m" or "CUST".
c) Press ENTER key or
11) ZERO
Perform the following steps to turn on or off correction function:
a)
Select "CABLE" through
b) Press ▲ or ▼ key to select "ON" or "OFF".
c) Press ENTER key or
or
ESC key to exit.
Figure 4-16 Range type
or key, as shown in Figure4-17.
ESC key to exit.
Figure 4-17 Automatic LCR switch
or
ESC key to exit.
Figure 4-18 Cable length setup
or
ESC key to exit.
29
key, as shown in Figure4-16.
key, as shown in Figure4-18.
key, as shown in Figure4-19.