Tips And Troubleshooting - Britax PIONEER Guia Del Usuario

Tips and Troubleshooting

TIP: To ensure proper installation of
the child seat:
• Route the lap and shoulder
portions of the vehicle seat belt
through the gap/notch in the
seat shell as shown.
Troubleshooting
Problem: The harness is hard to adjust.
Possible Solution: Check that the harness slots in the head
restraint and harness adjuster are properly aligned.
Possible Solution: The yoke may be caught on a strap or other
component of the child seat. Remove the obstruction and try
adjusting the harness again.
Problem: The adjuster strap is fraying at the sides.
Possible Solution: Pull the harness adjuster strap away from the
child seat (parallel to the ground) to tighten. Do not pull sideways.
Doing so may cause the harness adjuster strap to fray at the sides.
See page 17.
Problem: The buckle will not fasten with a click after each tongue
is inserted.
Possible solution: There may be debris in the buckle mechanism.
Clean the buckle as shown on page 44 and try fastening the
buckle again.
Please contact Consumer Services at 1-888-427-4829 or
1-704-409-1699 if you have an issue not listed here.
46