ProMinent DULCOTEST Manual De Instrucciones página 5

Application example
Measuring
transducer
Fluoride sensor
Technical data
FP V1
Measuring range:
Signal output:
Part No.:
Accuracy:
Input resistance:
Connecting thread:
Power supply:
Maximum power
consumption:
Ambient temperature:
Maximum relative humidity: 90 %
Protection type:
Material:
Dimensions:
Weight:
FP 100 V1
Measuring range:
Signal output:
Part No.:
Accuracy:
Input resistance:
Connecting thread:
Power supply:
Maximum power
consumption:
Ambient temperature:
Maximum relative humidity: 90 %
Protection type:
Material:
Dimensions:
Weight:
Accessories
2-wire sensor cable:
Reference
electrode
SPS
µP-indicator
Controller
PC
62 - 275.8 mV ^ = 0.03 - 130 ppm with measuring arrangement
consisting of fluoride sensor FLEP 010 SE / FLEP 0100 SE and
reference electrode REFP SE
4...20 mA ^ = 62...275.8 mV
Signal output is not electrically insulated from signal input.
1028280
≥ ± 1 mV
11
5 x 10 Ω
SN6
24 V DC (18-28 V DC)
0.5 W
-5...+50 °C
IP 65
PPE
138 x Ø 25 mm
85 g
0 - 213.8 mV ^ = 0.3 - 1340 ppm with measuring arrangement
consisting of fluoride sensor FLEP 010 SE / FLEP 0100 SE and
reference electrode REFP SE
4...20 mA ^ = 0...213.8 mV
Output signal is uncalibrated.
Signal output is not electrically insulated from signal input.
1031331
≥ ± 1 mV
11
5 x 10 Ω
SN6
24 V DC (18-28 V DC)
0.5 W
-5...+50 °C
IP 65
PPE
138 x Ø 25 mm
85 g
External diameter:
Conductor cross-section:
Conductor resistance:
Capacitance lead/lead:
Part No.:
1 Supply unit for two-wire
1
=
~
2 If several inputs are present
Supply unit
2
4 mm
2 x 0.25 mm
max. 80 Ω/km
90 pF/m
725122
measuring transducer with
electrical insulation.
on the unit they must be
electrically insulated.
2