Safety; General Safeguards - GBC Magnapunch 2.0 Manual De Instalación Y Funcionamiento

Magnapunch 2.0 – Installation and Operating Instructions
1. s
afety
Your safety, as well as the safety of others is
important. Before you install or use the Magnapunch
2.0, read and follow all the safety notices carefully
in this chapter. In this instruction manual, and on
the Magnapunch 2.0, you will find important safety
notices regarding the Magnapunch 2.0. Read all
of the instructions and save these instructions for
further use.
The safety alert symbol precedes each
safety notice in this manual. The symbol indicates a
potential personal safety hazard to you or others.
This safety alert symbol indicates a potential
electrical shock. It warns you not to open the
Magnapunch 2.0 and expose yourself to hazardous
voltage.
The following warnings are found on the
Magnapunch 2.0.
This safety notice means that you could be seriously
hurt or killed if you open the Magnapunch 2.0 and
expose yourself to hazardous voltage. Do not open
the Magnapunch 2.0. There are no user serviceable
parts inside. Refer service to qualified service
personnel.
This safety notice means that a
fire or risk of electrical shock
could result from using an
improper fuse. For continued
protection against fire or risk of
electrical shock, replace only
with the same type and rating
fuse.
WaRninGs
• Do not attempt to service or repair the
Magnapunch 2.0.
• Do not open the Magnapunch 2.0. There are
no serviceable parts inside. Refer service to
qualified service personnel.
• Do not connect the Magnapunch 2.0 to an
electrical supply or attempt to operate the
Magnapunch 2.0 until you have completely
read these instructions. Maintain these
instructions in a convenient location for future
reference.
• To guard against injury, the general safety
precautions must be observed when installing
and using the Magnapunch 2.0.
• Ensure the Power switch is in the OFF position
when the Magnapunch 2.0 is not in use.
• Consider the work area. A cluttered work area
can lead to accidents. The Magnapunch 2.0
must be placed on a sturdy level table surface.
Allow sufficient access to the front, back, and
sides of the Magnapunch 2.0. Keep the work
area well lit.
Failure to observe these warnings could result in
severe bodily damage or death.
G s
eneRal afeGUaRds
• Do not use the Magnapunch 2.0 for other than
its intended purposes.
• Do not defeat or remove electrical and
mechanical safety equipment such as
interlocks, shields, and guards.
• Do not insert objects unsuitable for punching
or expose the equipment to liquids.
• Use only GBC Magnapunch 2.0
interchangeable Die Sets with the
Magnapunch 2.0.
• Before you operate this Magnapunch 2.0, it is
important that you read and understand the
entire contents of these instructions.
Page 1-1