AD Instruments AD1062P Manual De Usuario página 183

MENU ONIOFF
1. Press the
screen and the corresponding optional settings on the bottom. Press
again to hide the Function Menu.
F1
2. Choose one key from
Set up the vertical system
1. Change the vertical setup and notice that each change affects the
status bar differently.
■
Change the vertical sensitivity with
status bar.
2. Move the signal vertically.
■
The I button moves the signal vertically. Also notice that the channel symbol on
the left side of the display moves in conjunction with the button.
To set up the horizontal system
1. Change the time base.
■
The or button changes the time base in a 1-2-5 step sequence, and displays
thevalue in the status bar.
2. Move signal horizontally.
■
The or button moves displayed signal horizontally on waveform window. It sets
the trigger point position.
Set up the trigger system
1. Change the trigger Level
■
The or button changes the trigger level. The trigger level value is displayed
at the top-right of the screen and a line is displayed showing the location of the trigger
level.
2. Change the trigger setup and notice these changes in the status bar.
■
Press TRIG button in the key panel.
Choose one key from F1 to F5 and press it to change function setting.
key to display the Function Menu on the bottom of the
F5
to and press it to change function setting.
or button and notice the change in the
17
MENU ONIOFF