Inglesina Zippy Evo Manual De Instrucciones página 29

HINTS FOR THE CLEANING OF THE TEXTILE LINING
• It is recommended to wash the lining separately from
other items.
• Periodically revive the fabric parts using a soft brush for
garments.
• Respect the washing regulations for the textile lining born
on the suitable labels.
Handwash in cold water.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
LIST OF COMPONENTS
Frame
fig. 1
T1 Front wheel assembly
T2 Rear wheel assembly
T3 Armrest cover
T4 String blocking plug
T5 Big handrail (facing the street)
T6 Handrail covering
T7 Stabilizing supports
T8 Storage basket
T9 Feeding bottle holding unit (if available)
Transport Seat
fig. 2
R1 Small handrail (facing mum)
R2 Transport seat hood
R3 Muff
R4 Rain cover (if available)
Carry cot/Car seat
fig. 3
C1 Carry cot
C2 Carry cot blanket
C3 Carry cot hood
S Huggy infant car seat
FRAME
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
fig. 4
Press the push-button (W1) and hook the rear
wheels (T2) until hearing a CLICK signalling the occurred
hooking.
fig. 5
Insert the strap (W2) in the proper seat on the frame.
fig. 6
Insert the string blocking plug (T4).
WARNING: the correct assembly of the joined brake is
important for the safe use of the frame.
fig. 7 In case of problems when mounting the plastic
plug (T4), it is possible to remove it as shown in figure; then,
repeat the procedure.
ASSEMBLING THE FRONT WHEEL ASSEMBLY
fig. 8
Hook the front wheel assembly (T1) until hearing
both CLICKs signaling the correct hooking.
WARNING
• Dry the textile lining completely before using or storing it.
• To prevent formation of mildew, it is advisable to air the
carry cot periodically. In detail, separate the textile lining
from the structure and run a dry cloth over the bottom.
INSTRUCTIONS
WARNING: make sure that the wheels are properly
hooked before use.
fig. 9
spring (W3) and extract the assembly simultaneously.
FRAME OPENING
fig. 10
right handle, firmly lift the frame until it is completely open.
fig. 11
control (F2) till the horizontal blocking position.
fig. 12
attached on both sides before use.
FRAME CLOSING
fig. 13
handle (F4).
fig. 14
completely closed.
fig. 15
central articulated joint.
TRANSPORTATION HANDLE
fig. 16
handle (F6). Do not lift the frame by the opening handle (F4).
HANDLE ADJUSTMENT (FOR MODELS, WHERE IT IS
FORESEEN)
fig. 17
terms of height and direction; to adjust the handle to the
wished position, act on the internal push-buttons (F7).
REAR WHEELS BRAKE
fig. 18
(T10) positioned on the rear wheels.
Always engage the brake during stops.
FRONT WHEELS BLOCKING/RELEASE
fig. 19
can be blocked or released simply by acting on the lever (W4)
positioned on the front wheels.
REAR PLATFORM
fig. 20
crossing of obstacles.
To remove the front wheel assembly, press the
Keeping pressed the lever (F1) positioned on the
Complete the procedure by acting on the pedal
Make sure that all closing mechanisms are properly
By pressing the red push-button (F3), lift the
Pull the handle firmly upwards until the frame is
Make sure that the lever (F5) is attached to the
To transport the closed frame, use the proper
The Frame is equipped with adjustable handles in
To engage the brake, push downwards the lever
The Frame is equipped with pivoting wheels that
Act with the foot on the rear platform to ease the
29