CGC RYAN Serie Manual Del Operador página 8

1
FIGURE 4
1. "L" Bracket
10. Connect clutch control rod to idler pulley assembly.
3
2
FIGURE 5
Briggs Engine Shown
1. Brake Band
2. 1/4–20 Screw
3. Clevis
11. Route convoluted tubing from control panel to the
front of the engine and attach at three points shown
in Figures 6 and 7 (for Honda engines route wiring
and cable on the inside of the bracket). Secure hard-
ware.
6
1
5386
12. Connect red wire male connector from convoluted
tubing harness to black female connector on front of
1
engine. See Figure 8 and 9.
5169
FIGURE 6
1. Tubing Clips
FIGURE 7
1. Tubing Clip
FIGURE 8
1. Black Female Connector
Briggs Engine Shown
1
5390
1
5391
1
5392