Mounting The Side Shelf; Installing The Grease Tray; Securing The Chimney - Pit Boss PB820SC Instrucciones Y Recetas

• Last, remove the two pre-mounted screws for the bottle opener, and
re-install on the corner of the side shelf. Note illustration 10B.

11. MOUNTING THE SIDE SHELF

Installation:
• Remove the four pre-mounted screws from the side of the main barrel.
• From underneath, secure the side shelf to the side panel of the main
barrel using the four screws previously removed.
NOTE: Do not tighten any screws completely until all screws have
been installed. Once all screws are installed, then tighten securely.
IMPORTANT: Avoid using the side shelves to move or lift the grill.
The weight of the unit will cause the side shelf to break, which is not
covered by warranty.

12. INSTALLING THE GREASE TRAY

Parts Required:
1 x Grease Tray (#13)
1 x Grease Tray Handle (#16)
Installation:
• Remove the pre-mounted screws from the side shelf handle. On the
edge of the grease tray with two holes, align the handle with the holes,
then hand-tighten the screw (from the inside) into the handle. Note 12A.
• Slide the grease tray into the tray opening on the front panel of the
unit. The grease tray is completely inserted once the front of the tray
is flush with the front panel of the unit. Note 12B.

13. SECURING THE CHIMNEY

Parts Required:
1 x Chimney Gasket (#4)
1 x Chimney Cap Assembly (#5)
1 x Chimney Stack (#6)
Installation:
• Locate the chimney opening on the side of the main barrel. Remove
the pre-installed two screws, locking washers, and washers.
• From the outside of the main barrel, secure the chimney gasket and
chimney stack to the side panel by re-installing the two screws, locking
washers, and washers. The screw will fasten to the pre-mounted nut
on the inside of the barrel.
• Next, secure the chimney cap onto the top of the chimney stack with
the screw and nut as shown.
NOTE: Adjust the chimney cap to affect the airflow inside the main
grill. If cooking at low temperature, keep the cap more open. Ensure
the chimney cap allows for air to escape.
10
11
12A
12B
13