Unit Description; Electrical Diagram Of The System; Ingecon Sun Storage 1Play - Ingeteam INGECON SUN STORAGE 1Play Manual De Instalacion Y Uso

Ingeteam

2. Unit description

The INGECON SUN STORAGE 1Play is a dual input DC (photovoltaic and battery) single-phase inverter capable of
working in off-grid mode or connected to the distribution grid. This equipment can be used in the following types
of installations:
Stand-alone installations
A stand-alone installation is a system disconnected from the distribution grid that provides AC power to a set of
consumers.
UPS (Back-up) installations
A UPS installation is a system connected to the distribution grid that is used as back-up in the event of a power
cut. In this case the installation works as an Off-line type UPS.
Self consumption installations
A self consumption installation is a system connected to the distribution grid that seeks to minimize grid
consumption and increase self-supply.
There are two types, depending on the device responsible for managing the self-consumption installation:
• Self consumption managed by INGECON SUN STORAGE 1Play. The energy flows within the installation
are managed by the inverter. Additionally, the back-up function can be activated in this type of
installation. With this function, the inverter disconnects the installation from the distribution grid in the
event of a power outage and the energy required for consumers is provided from the batteries, operating
in a similar manner to a UPS.
• Self consumption managed by INGECON SUN EMS Board. The energy flows within the installation are
managed by the EMS Board energy manager.
INFO
For more information about this type of installation, see the "Technical guide for installations with
INGECON SUN STORAGE 1Play" available on the Ingeteam website.

2.1. Electrical diagram of the system

INGECON SUN STORAGE 1Play

A. Consumption grid relay.
12
A B
J56
B. Grid or auxiliary generator relay.
J55
ABH2013IQM01_C- Installation and Operation Manual
Unit description